Out of Stock

CC1101 RF1101 Wireless Transceiver Module with SMA Antenna

Reference: #2704

R 324.80

Out of Stock

Because of 1.2K baud rate, the CC1101 peripheral circuit is relatively high precision, and in order to improve the effective communication distance is has beenespecially developed to change/add the antenna.

CC1101 CC1100 major improvement in part

Improve the spurious response;

Closer to improve phase noise better adjacent channel power (ACP) performance;

Higher saturation level input;

Higher power output performance

Extended continuous frequency band,

CC1100: 400-464 MHz and 800-928 MHz

CC1101: 387-464 MHz and 779-928 MHz

1. Peripheral circuit device using the external parameters 1% precision,

2. 1.2K baud designed specifically for low-speed, improve communication distance 1101

3. Smaller and more stable than ordinary CC1100 modules and the 1.2K baud rate, long distance of about 50-100 m

CC1101 CC1100 major improvement in part

Improve the spurious response;

Closer to improve phase noise better adjacent channel power (ACP) performance;

Higher saturation level input;

Higher power output performance

Extended continuous frequency band,

CC1100: 400-464 MHz and 800-928 MHz

CC1101: 387-464 MHz and 779-928 MHz

1. Peripheral circuit device using the external parameters 1% precision,

2. 1.2K baud designed specifically for low-speed, improve communication distance 1101

3. Smaller and more stable than ordinary CC1100 modules and the 1.2K baud rate, long distance of about 50-100 m

CC1101: 387-464 MHz and 779-928 MHz

Arduino Tutorial: NRF24L01+ Long Distance Transceiver (PA+LNA, External Antenna)
This tutorial is a detailed, practical guide to using the 2.4GHz NRF24L01+ long-distance transceiver module (the larger “PA+LNA” style board with external antenna) with Arduino projects. You will learn correct wiring, the critical power-supply requirements, RF24 library usage, reliable packet design, range tuning, and troubleshooting.
H201 433MHz RF Transmitter + Receiver Tutorial: Arduino Wireless Basics, Range, Antennas, and Reliable Messaging
This tutorial is a detailed, practical guide to using the H201 RF receiver + RF transmitter module kit (Leobot Product #190) to send simple wireless messages between two Arduino boards. You will learn correct wiring, how these ASK/OOK radios actually work, how to improve range with a basic antenna, and how to build reliable “send + receive” sketches using common Arduino libraries.