20KV High Voltage Generator ( DC 3.6-6V, 1.5A, Pulse Arc Igniter, Step Up Boost Module Coil Transformer)

R 89.60 In Stock (22)

A 20kV high voltage generator is a device that produces high voltage electrical discharges, typically in the range of 20,000 volts. These generators are often used for testing the insulation of electrical equipment or for producing sparks or arcs for scientific or artistic purposes.

One type of high voltage generator that produces 20kV outputs is a pulse arc igniter, which uses a DC power source and a step-up boost module to generate the high voltage. The boost module typically consists of a transformer, or boost coil, that increases the voltage of the input current to the desired level.

To use a 20kV high voltage generator, you will need to connect the input power source to the generator and adjust the output voltage as needed. It is important to handle high voltage generators with caution, as they can produce dangerous electrical discharges and should only be used by trained and qualified individuals.

Double high voltage cable can ignite cigarette and paper while a single high voltage cables can provide power to a metal body.

The module can be used with scientific experiments, electronic devices, negative-ion generator, high-voltage sourceand when arc ignition is required in small devices.

Double high voltage cable can ignite cigarette and paper while a single high voltage cables can provide power to a metal body.

The module can be used with scientific experiments, electronic devices, negative-ion generator, high-voltage sourceand when arc ignition is required in small devices.

Specification:

Material: metal, plastic

Color: black and black

Size: 19 x 20 x 18 mm (L x W x H)

Input voltage: DC3.6V-6V

Input Current: 1.5A

Output voltage: DC20KV (Please be sure to use safety when used)

Output current: 0.05A

InputLine Length: approx. 110 mm (red is positive)

Output cable length: approx. 110mm

High voltage bipolar discharge distance: 5mm

High type: pulse current

Structure: High and low voltage integrated

Note:

1. The high-voltage module should avoid the use of high-voltage current without a load. Power must be set to a suitable distance to the high voltage output line, the battery capacity is proportional to the distance and the use of the high pressure arc (not a voltage as high as possible, must provide sufficient current).

2. Experimental testing of the arc distance from short to long. If you do not exceed the maximum arc gap current, energy is not released by high pressure, the module can be easily damaged.

3. Due to the performance, the internal heat is not easy, each operating time should be set within 5 seconds.