DC 400W 15A Constant Current Power Supply & Step-Up Boost Converter (8.5V-50V to 10V-60V range)

R 196.00 In Stock (9)

A DC 400W 15A constant current power supply is a type of power supply that can provide a constant current to a load, regardless of the voltage drop across the load. Constant current power supplies are commonly used in applications where it is important to maintain a stable current, such as when driving LEDs or charging batteries.

A step-up boost converter is a type of electronic circuit that can increase the voltage of a DC power source. A step-up boost converter works by using a switching transistor to charge a storage capacitor to a higher voltage than the input voltage, and then discharging the capacitor through a transformer to produce an output voltage that is higher than the input voltage.

A DC 400W 15A constant current power supply and step-up boost converter with an input voltage range of 8.5V-50V and an output voltage range of 10V-60V is a combination of a constant current power supply and a step-up boost converter that can accept an input voltage within the specified range and produce an output voltage within the specified range.

To use a DC 400W 15A constant current power supply and step-up boost converter, you will need to connect the power supply to a suitable power source and the load to the output of the power supply. You will also need to adjust the settings of the power supply and the boost converter as needed to set the desired output voltage and current.

This useful module can be used in a range of applications related to power supplies and high wattage step-up boosters such as

1. DIY a power supplies: Can use a 12V input and output can be 12-50V (and adjustable).

2. Powering electronic devices that require a specifc voltage not easily obtainable by other means.

3. Providing power to normal consumer devices such as laptops.

5; Solar panel regulators, acting to provide a stable power supply from a varying source.

6. Driving high-power LED lights.

This useful module can be used in a range of applications related to power supplies and high wattage step-up boosters such as

1. DIY a power supplies: Can use a 12V input and output can be 12-50V (and adjustable).

2. Powering electronic devices that require a specifc voltage not easily obtainable by other means.

3. Providing power to normal consumer devices such as laptops.

5; Solar panel regulators, acting to provide a stable power supply from a varying source.

6. Driving high-power LED lights.

Module properties: non-isolated step-up module (BOOST)

Input voltage: DC8.5V-50V

Input current: 15A (MAX) exceeds 8A please enhance heat dissipation

Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)

Output voltage: 10-60V continuously adjustable

Constant] range: 0.2-12A

Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)

Operating frequency: 150KHz

Conversion efficiency: up to 96%

Overcurrent protection: yes

Input reverse polarity protection: no

Installation: 4 2.55mm screw holes

Connection method: Connection Output

Module size: 67mm X48mm X 28mm (LxWxH)

Single module: 60 g

Arduino Automated Plant Water Project
A simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.
Arduino Introduction
Introducing you to the awesome Arduino!
Simple Arduino RC Car/Robot
A guide to construct your own Arduino-based 2 Wheel-Drive Robot
Arduino F.A.Q
Arduino Frequently Asked Questions & Answers