BAROMETRIC PRESSURE SENSOR MODULE (BMP180)

This barometric pressure sensor is easy to use with an Arduino.


The BMP180 is the next-generation of sensors from Bosch, and replaces the BMP085. The good news is that it is completely identical to the BMP085 in terms of firmware/software - you can use our BMP085 tutorial and any example code/libraries as a drop-in replacement. The XCLR pin is not physically present on the BMP180 so if you need to know that data is ready you will need to query the I2C bus.

  • Vin: 3 to 5VDC
  • Logic: 3 to 5V compliant
  • Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
  • Up to 0.03hPa / 0.25m resolution
  • -40 to +85°C operational range, +-2°C temperature accuracy
  • This board/chip uses I2C 7-bit address 0x77.

  • N/A

More from this Category

LM393 Light Detection Sensor Module (4-pin LM393 LDR Digital & Analog)

LM393 Light Detection Sensor Module (4-pin LM393 LDR Digital & Analog)

R 45.66 View
TCRT5000 Infrared Line Tracking & Tracing Sensor Module

TCRT5000 Infrared Line Tracking & Tracing Sensor Module

R 36.07 View
ADXL345 3-Axis Accelerometer Module

ADXL345 3-Axis Accelerometer Module

R 122.98 View
Speed Sensor/Tacho Sensor (Slot-Type Optocoupler)

Speed Sensor/Tacho Sensor (Slot-Type Optocoupler)

R 42.17 View
IR Infrared Obstacle Avoidance Sensor Module

IR Infrared Obstacle Avoidance Sensor Module

R 39.63 View
Snow & Rain Detection Sensor Module

Snow & Rain Detection Sensor Module

R 54.57 View
Out of Stock
3-Axis Compass Magnetometer Module (GY-273 QMC5883L)

3-Axis Compass Magnetometer Module (GY-273 QMC5883L)

R 78.40 View
Temperature Sensor Module (KY-001 3pin DS18B20)

Temperature Sensor Module (KY-001 3pin DS18B20)

R 59.63 View
Soil Moisture (Humidity) Sensor Module

Soil Moisture (Humidity) Sensor Module

R 41.00 View
Reed Sensor Module (MagSwitch)

Reed Sensor Module (MagSwitch)

R 18.71 View