A 12V fan hub is a device that allows you to connect and control multiple 12V DC fans using a single PWM (pulse-width modulation) control signal. It typically consists of a PWM controller and multiple fan connectors, which are used to connect the fans to the hub.
A 10-way fan hub is a specific type of fan hub that has the capability to connect and control up to 10 fans. It is typically used to connect and control multiple fans in a computer case or other cooling system. The PWM control signal can be used to adjust the speed of the fans, allowing you to fine-tune the cooling performance of the system.
Fan hubs are useful in a variety of applications where it is necessary to control the speed of multiple fans, such as in computer cases, servers, and other electronic equipment. They can help to improve the cooling performance of the system and reduce noise by allowing you to adjust the speed of the fans based on the temperature of the system.
This 12V fan hub supports up to 10 fans, all of which can be controlled by PWM easily.
- Suitable for 12V 4pin fans.
- Power supply IDE interface input.
- Support 10-way 4pin fans start at the same time, solve motherboard interface shortage
- and deal with the back EVA double-sided adhesive, you can fix the hub on the chassis.
- Support pwm function, fan automatic speed control.
- The PWM interface is connected to the motherboard CPU fan interface via the PWM connection cable,
- the red interface is the CPU fan specific interface, and the black interface is the PWM regular fan interface.
- EVA double-sided adhesive in the back side, you can fix the hub in the computer case.
- Size: 74 x 48mm
- The fan is a 4-pin PWM fan, which is very important. Some motherboard 4-pin interfaces are not a real PWM fan jack,
- they are adjusted by the voltage. Such motherboards can not make PWM control fans.
- Connect the motherboard 4-pin fan interface, BIOS starts the PWM function.
- N/A
