#1606: 2.4GHz Wireless Transceiver Module (NRF24L01, onboard antenna)

R47.30

NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz

- Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator

- The output power channel selection and protocol settings can be set to extremely low current consumption, through the SPI interface

-In transmit mode, the transmit power is 6dBm, the current is 9.0mA, the accepted mode current is 12.3mA, the current consumption of the power-down mode and standby mode are lower.

- Built-in 2.4GHz antenna, supports up to six channels of data reception

- Size: 15 x 29mm (including antenna)

- Low operating voltage: 1.9-3.6V

- 125 channels, multi-point communication and frequency hopping to meet the communication needs

- High Rate: 2Mbps, as air transmission time is very short, greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps)

- The NRF24L01 integrated part of all high-speed signal processing related to RF protocol, such as: automatic retransmission of lost packets and automatically generate response signals, etc.

- Internal FIFO compatible with a variety of microprocessor interface, micro-controller is convenient

- Standard pin Dip2.54MM spacing interface for embedded applications

For more info on how to use this module have a look at a great tutorial available at https://howtomechatronics.com/tutorials/arduino/arduino-wireless-communication-nrf24l01-tutorial/

Product Details

Size: 15 x 29mm (including antenna)

- NRF24L01 SPI interface: hardware SPI port, MCU I/O ports

- Dip2.54MM spacing

Tutorials

Arduino Automated Plant Water Project
A simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.