Digital & Analog Temperature Sensor Module (KY-028) - South Africa Arduino, Robotics & Electronics Supplier South Africa: R37.40
Leobot Electronics South Africa (Pretoria)
Pretoria, South Africa
Nation-wide delivery or, collect from our premises in Waverley, Pretoria
- New orders during business-hours are handled within 15-minutes of being paid and, you are welcome come collect immediately if you are in the area! All stock quantities shown on the website is up-to-date and, that which is not listed as "Coming Soon" is available on-hand.

Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Waverley, Pretoria, South Africa.

    • Leobot Electronics Online Shop

Digital & Analog Temperature Sensor Module (KY-028)
    Home / Sensors / Digital & Analog Temperature Sensor Module (KY-028)
  • Digital & Analog Temperature Sensor Module (KY-028)

#216: Digital & Analog Temperature Sensor Module (KY-028)

R37.40


The KY-028 is a temperature sensor module that can be used to measure the ambient temperature. It consists of a thermistor and a small circuit board that can be used to convert the resistance of the thermistor into a temperature reading. The module can be used in both digital and analog mode. In digital mode, the module converts the temperature reading into a digital signal that can be read by a microcontroller or other device. In analog mode, the module outputs an analog voltage that is proportional to the temperature. The module can be used in a variety of applications, including temperature monitoring and temperature control.

 

Use this 4-pin module to determine the heat as detected by the Thermistor. Perfect for Arduino projects

  • 1. using the NTC thermistor sensor , good sensitivity
  • 2. the comparator output signal clean waveform is good , driving ability, than 15mA.
  • 3. adjust the temperature distribution bit detection threshold
  • 4. Working voltage 3.3V-5V
  • 5. the output format : Digital switching output (0 and 1)
  • 6. with bolt holes for easy installation
  • 7. a small board PCB size : 3.2cm x 1.4cm
  • 8. using a wide voltage LM393 comparator

Product Details

  • 1. using the NTC thermistor sensor , good sensitivity
  • 2. the comparator output signal clean waveform is good , driving ability, than 15mA.
  • 3. adjust the temperature distribution bit detection threshold
  • 4. Working voltage 3.3V-5V
  • 5. the output format : Digital switching output (0 and 1)
  • 6. with bolt holes for easy installation
  • 7. a small board PCB size : 3.2cm x 1.4cm
  • 8. using a wide voltage LM393 comparator


Product Details

Est. Packaging Size Specifications

N/A

Tutorials

Arduino Automated Plant Water Project
A simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.

Arduino Introduction
Introducing you to the awesome Arduino!

Simple Arduino RC Car/Robot
A guide to construct your own Arduino-based 2 Wheel-Drive Robot

Arduino F.A.Q
Arduino Frequently Asked Questions & Answers

Other Products in the same category

BUY

Digital & Analog Temperature Sensor Module (KY-028)

Regular price: R37.40
Qty To Purchase:
In Stock: 10



GET NOTIFIED!

Get notified when new stock arrives! Simply provide your email address:


Email Address:



Categories
 
  • Shipping Costs South Africa Arduino, Robotics & Electronics Supplier

Facebook


Youtube

Our YouTube channel features a diverse range of content, including electronics, gaming, and intriguing videos. Check it out to see what we've got in store for you here at our YouTube Channel

Discord

You can join in a community of like-minded people to discuss projects, solve problems and find opportunities at our Discord Channel

Steam

You can find some of our released PC games at our Steam Profile

GitHub

Important source code and libraries for Arduino can be found at our Github Repositories

Thingiverse

Important 3D models and designs by Leobot Electronics can be found on our Thingiverse Profile

Instagram

Cool projects, photos and artwork by Leobot Electronics can be found on our Instagram Profile

Shipping & Coverage

For South Africa, PostNet is used for shipping at R115 per order if delivered to your local PostNet or R105 if the parcel needs to be delivered to your doorstep via Aramax! Postage is FREE for orders over R1000!


We supply Arduino, Robotics and all of our other DIY Electronics throughout South Africa including Durban, Johannesburg, Pretoria, Cape Town, Bloemfontein and rural areas.


3D Printing Service available at Leobot3d.com for all your custom printing needs.


For industrial-level laser CNC machines have a look at our trusted partner www.PloughLaserMachine.com.


You can find great electronic kits in Pretoria at www.ElectroKits.co.za.


Information


Contact us

Admin Office:
1348B Breyer Avenue (Collections),

Waverley,,

Pretoria,

Gauteng,

South Africa,

Phone: 082 776 7668

Fax:

Email:info[a.t]leobot[d.o.t]net


Leobot Electronics Developed PC Games

Leobot Electronics is also involved in the world of game development. We are dedicated to honing our skills and constantly improving, with the ultimate goal of releasing top-notch games. Our technical expertise is strong, but we're always looking to expand our capabilities. Currently, we're searching for in-house graphic artists to help bring our ideas to life with stunning graphics. While we have a ways to go, we're excited about the journey and can't wait to see what the future holds for us in game development.

© 2023 Design by Leobot Electronics and w3layouts