Ethernet LAN Network Port Module (ENC28J60) - South Africa Arduino, Robotics & Electronics Supplier South Africa: R225.61
Leobot Electronics South Africa (Pretoria)
Pretoria, South Africa
Nation-wide delivery or, collect from our premises in Waverley, Pretoria
- New orders during business-hours are handled within 15-minutes of being paid and, you are welcome come collect immediately if you are in the area! All stock quantities shown on the website is up-to-date and, that which is not listed as "Coming Soon" is available on-hand.
    • Leobot Electronics Online Shop

Ethernet LAN Network Port Module (ENC28J60)
  • Ethernet LAN Network Port Module (ENC28J60)
  • Ethernet LAN Network Port Module (ENC28J60)
  • Ethernet LAN Network Port Module (ENC28J60)
  • Ethernet LAN Network Port Module (ENC28J60)

#2715: Ethernet LAN Network Port Module (ENC28J60)

R225.61


The ENC28J60 is a popular Ethernet LAN Network Port Module. It is a standalone device that allows a microcontroller to connect to an Ethernet network. It provides a simple interface between the microcontroller and the Ethernet, allowing the microcontroller to communicate over the network using standard TCP/IP protocols. The module provides a 10BASE-T Ethernet interface, and supports hardware-based checksum calculations and automatic padding of short packets, which helps to minimize processing overhead for the microcontroller.

 

ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. This Ethernet LAN module connects directly to most microcontrollers.

Add networking capabilities to your project with this LAN/Ethernet module for Arduino. This module is based on the ENC28J60 chip and is quick to get up and running.

Product Details

  • Ethernet LAN Module for Arduino/AVR/LPC/STM3
  • ENC28J60 Ethernet chips
  • Can be easily mounted with the MCU
  • Network Interface: HR911105A
  • Supply Voltage: 3.3 V (5V Tolerant DIO)
  • 25Mhz crystal oscillator
  • Size (L x W x H): Approx. 2.3 x 1.3 x 0.7 inch / 58 x 34 x 17 mm

 

PINOUT
PIN DESCRIPTION
1 CLK OUT
2 INT
3 WOL
4 SO
5 SI
6 SCK
7 CS
8 RES
9 +3.3V
10 GND

 

Datasheet can be found here: http://ww1.microchip.com/downloads/en/devicedoc/39662c.pdf 


Product Details

Est. Packaging Size Specifications

N/A

Tutorials

Arduino Automated Plant Water Project
A simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.

Arduino Introduction
Introducing you to the awesome Arduino!

Simple Arduino RC Car/Robot
A guide to construct your own Arduino-based 2 Wheel-Drive Robot

Arduino F.A.Q
Arduino Frequently Asked Questions & Answers

BUY

Ethernet LAN Network Port Module (ENC28J60)

Regular price: R225.61
Qty To Purchase:
In Stock: 4





GET NOTIFIED!

Get notified when new stock arrives! Simply provide your email address:


Email Address:



Bulk/Direct Imports!

Want more stock than we have on-hand? Let us import this product in bulk for you! Bulk Direct Import




Categories