Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Port Elizabeth, South Africa.
Leobot Electronics Online Shop
R475.65
Use this sliding stepper motor to add linear motion to your Arduino projects. This is commonly used in CNC machines and 3D printers.
Motor Type: 2 phase 4 wire
Driving Voltage: DC 4-9V/500mA
Step Angle: 18 degree
Screw Length: 90mm / 3.5inch
Screw Diameter: 3mm / 0.1inch
Slider Width: 15mm / 0.6inch
Effective Stroke: 80mm / 3.1inch
Screw Pitch: 0.5mm / 0.02inch
Stage Size: 105 x 15mm / 4.31 x 0.59inch
5V Stepper Motor 28BYJ-48 + ULN2003 Test-Driver Module (Arduino)
R65.50
High-Power ULN2003 Stepper Motor Driver Board Test Module (Without Motor)
R32.15
DC 5V 4-Phase Stepper Motor 28BYJ-48
R43.93
ULN2003 5V 4-phase 5 line 28BYJ-48 Motor Driver
R35.01
Nema 17 Stepper Motor (17HS2408)
R263.95
2-Phase 4-Wire Micro Miniature Screw Rod Stepper Motor
R8.89
High Power L293D Motor Control Arduino Shield (4 DC Motors or 2 Servo Motors)
R78.20
5V 2-Phase 4-Line Super Mini Stepper Motor with Output Copper Gear (K976Y)
R21.38
Two 1.5V-3V Wired 4-Line Super Mini Stepper Motors with Output Copper Gear (D8mm x H9.2mm)
R39.30
2-Phase 4-Wire Micro Stepper Motor (10mm, JSDJ2P4W10M)
R41.60
2-Phase 4-Line Super Mini Stepper Motor with Output Gear Shaft (JSDJ2P4W895G)
R27.30
12V Disassemblable CNC Stepper Motor (962BA; Metal Gear Reduced, Gear Ratio 36:1)
R67.31
3V 200mA 4-Wire/2-Phase Micro Stepper Motor with Worm Shaft (1000RPM, 6mm Diameter, 3V, 200mA)
R14.90
4-Wire/2-Phase Micro Stepper Motor (D6mm x H10mm)
R17.50
Linear Stepper Motor (DC4-9V, 18 Degree Step Angle, Screw With Nut Slider, 2-Phase 4-Wire)
Nema 23 Stepper Motor (23HS5628)
R341.95
Nema34 (85 Kg-cm, 1.8 Degree, 6A, 2-Phase, 4-Lead, 86HS118604AJ)
R2379.85
Get notified when new stock arrives! Simply provide your email address: