Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Waverley, Pretoria, South Africa.
Leobot Electronics Online Shop
R59.95
The L298N is a H-bridge motor driver IC that can be used to drive DC motors and stepper motors. It can control both the speed and direction of the motors. The L298N can operate with a voltage range of 5V to 46V and can deliver a continuous output current of up to 4A per channel. The IC has a total of four channels, two for each of the two motors that it can drive. It has a total of 15 pins, including input and output pins for each of the four channels and various control and power pins. The L298N can be used with microcontrollers or other control systems to drive motors in a variety of applications.
The L298N IC is the perfect motor driver (H-Bridge) IC for most all projects. It can handle high voltage and high current but care needs to be taken to not overheat the IC during long operations. Usually the IC would have a heatsink attached (such as the L298N Modules available at Leobot Electronics).
The L298N can be used to drive both DC motors and Servo Motors.
L298N NXN18178
Operating supply voltage up to 46 VMax DC current of up to 4 A (2A Recommended max)Over-temperature protectionLogical "0" input voltage up to 1.5 V
N/A
CNC Controller Stepper Motor Driver (TB6560 Mach3, 3.0A, 1-Axis)
R202.80
A4988 STEPPER MOTOR DRIVER (RAMPS)
R43.95
High-Power Motor H-Bridge Driver (43A, BTS7960B)
R249.35
L298N IC (H-Bridge Motor Driver IC, 46V, 4A ,15-Pin)
Dual DC Motor Driver Module (1.5A, 2-Way, MX1508 ,PWM Speed Control; Dual H-Bridge, MX1616)
R31.51
High-Power Pulse Width Modulator PWM Waterproof DC Motor Speed Controller (10-60V 20A)
R247.00
TMC2208 Stepper Motor Driver
R104.00
Get notified when new stock arrives! Simply provide your email address: