1.3 inch 240x240 IPS LCD Screen ST7789 (SPI Communication, 3.3V, ST7789VW) - South Africa Arduino, Robotics & Electronics Supplier South Africa: R156.00
    • Leobot Electronics Online Shop

1.3 inch 240x240 IPS LCD Screen ST7789 (SPI Communication, 3.3V, ST7789VW)
  • 1.3 inch 240x240 IPS LCD Screen ST7789 (SPI Communication, 3.3V, ST7789VW)

#4181: 1.3 inch 240x240 IPS LCD Screen ST7789 (SPI Communication, 3.3V, ST7789VW)

R156.00


The 1.3 inch 240x240 IPS LCD screen is a small, high-resolution display that can be used to display text, graphics, and other types of information. The screen has a resolution of 240x240 pixels and uses in-plane switching (IPS) technology to provide wide viewing angles and good color accuracy.

The ST7789 is a type of display controller that is commonly used with the 1.3 inch 240x240 IPS LCD screen. The ST7789 is a chip-on-board (COB) controller that integrates the display driver and interface circuits onto the same substrate as the LCD panel, which helps to reduce the size and cost of the display.

To use a 1.3 inch 240x240 IPS LCD screen with a microcontroller, such as an Arduino, you will need to connect the screen to the microcontroller using a suitable connector or set of wires. The screen will typically have a set of pins or a connector for the microcontroller, as well as a connector for the display and a connector for the backlight. You will also need to install a library or firmware that provides functions for controlling the display and drawing text and graphics to the screen.

 

 

This low-voltage min LCD is is easy to use and due to the low resolution of 2440x240 has a quick refresh rate.

Product Details

SIZE 1.3inch 
Display Mode Normally black IPS
Display Format Graphic 240RGB*240 Dot-matrix
Input Data SPI interface
Drive IC ST7789VW
Dimensional outline 27.78(W)*39.22 (H)*3.0+/-0.1(T)mm
Resolution 240RGB*240 Dots
LCD Active area 23.4 (W)*23.4 (H)
Dot pitch 0.0975(H) x 0.0975(V) mm
Viewing Direction All View
Operating Temperature -20~70°C
 
 
2.Pin Descriptions:
 
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 BLK Backlight control pin


Product Details

Est. Packaging Size Specifications

N/A

Tutorials

Arduino Automated Plant Water Project
A simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.

Arduino Introduction
Introducing you to the awesome Arduino!

Simple Arduino RC Car/Robot
A guide to construct your own Arduino-based 2 Wheel-Drive Robot

Arduino F.A.Q
Arduino Frequently Asked Questions & Answers

BUY

1.3 inch 240x240 IPS LCD Screen ST7789 (SPI Communication, 3.3V, ST7789VW)

Regular price: R156.00
Qty To Purchase:
In Stock: 4



GET NOTIFIED!

Get notified when new stock arrives! Simply provide your email address:


Email Address:



Categories