Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Waverley, Pretoria, South Africa.
Leobot Electronics Online Shop
R25.95
The heater block is basically a small machined aluminum block. It has a CNC drilled and tapped thread right the way through the top that accepts the V5 heat break and E3D nozzle. It also has CNC drilled holes that accept the heater cartridge as well as 100kΩ 1% NTC thermistor. The heater cartridge is used to heat up the heater block to the desired temperature which intern heats up the hot end of the heat break and nozzle allowing smooth extrusion of the filament. The Thermistor is used to read and monitor the temperature of the heater block allowing for accurate closed loop PID temperature control
– Stainless Steel
– M6
– 2mm
– 6.2mm
– 16mm
N/A
DIY 3D Printer: The ultimate guide to building your own Prusa i3 Mk2 style 3D printer.A guide to the components needed to build your own DIY 3D printer
G-Code Instruction SetA comprehensive list of G-Code commands used by 3D printers and CNC machines
RAMPS LCD Control Panel (12864 LCD)
R389.00
Bowden Teflon PTFE Tube (2mmx4mm, Per Meter)
R34.71
E3D V6 HOTEND ASSEMBLY FOR 1.75MM FILAMENT (Direct Drive)
R299.95
3D Printer Build Surface Heat Bed Sticker (214mmx214mm, Mk3)
R107.95
BigTreeTech SKR 1.4
R689.85
V6 PC4-01 BOWDEN CONNECTOR
R21.55
E3D V5 COOLING TOWER 30MM FAN - WITH MOUNT
R33.95
HEATER CARTRIDGE - 6X20MM 12V 40W
R33.49
EXTRUDER DRIVE GEAR - 26 TOOTH
R18.95
E3D V6 1.75MM HEAT BREAK
R19.95
Bowden V6 J-head Hotend Heatsink for 1.75 mm filament
R39.95
MK7 EXTRUDER DRIVE GEAR
R24.95
E3D V5 HEATER BLOCK
E3D V5 COOLING TOWER (1.75MM FILAMENT)
R34.95
E3D V5 1.75MM HEAT BREAK
R29.95
Get notified when new stock arrives! Simply provide your email address: