Ceramic Piezo Vibration/Strain Module (3V3/5V) - South Africa Arduino, Robotics & Electronics Supplier South Africa: R49.60
    • Leobot Electronics Online Shop

Ceramic Piezo Vibration/Strain Module (3V3/5V)
  • Ceramic Piezo Vibration/Strain Module (3V3/5V)

#4246: Ceramic Piezo Vibration/Strain Module (3V3/5V)

R49.60


A ceramic piezo vibration/strain module is a device that allows you to detect vibrations or strains using a piezoelectric ceramic element. It consists of a piezoelectric ceramic element, which is a material that generates a voltage in response to applied mechanical stress, and a microcontroller or other control logic that is used to process the output from the piezoelectric element.

Ceramic piezo vibration/strain modules are commonly used in a variety of applications where it is necessary to detect vibrations or strains, such as in structural health monitoring, vibration sensing, and impact sensing. They can be used to detect small movements or changes in the strain on a structure or component, allowing for the creation of systems that can monitor the condition of a structure or alert the user to potential problems.

 

 

When the piezoelectric ceramic is under a state of strain (momentary shock) it will generate an electrical signal which can then be provide to a microcontroller such as an Arduino to process further. This module comes with the piezo disc and a driver to amplify signals from the piezoelectric material to be read by the Arduino or other MCU.

A piezo disc element is a type of piezoelectric device that is used to generate or detect mechanical vibrations. It consists of a thin, circular disc of piezoelectric material that is able to generate or detect electrical charges when subjected to mechanical stress.

Piezo disc elements are often used in a variety of applications that require the detection or generation of mechanical vibrations, such as in ultrasound imaging, force sensing, and acoustic transducers. They are known for their high sensitivity and fast response time, and they are able to operate over a wide range of frequencies.

Piezo disc elements are widely used in a variety of applications due to their high sensitivity and fast response time. They are a reliable and widely used type of piezoelectric device that is easy to use and integrate into a variety of projects.

Product Details

  • Working Voltage: 3.3V or 5V.
  • Working Current: <1mA.
  • Interface Type: Analog Output.
  • Size: 30mm x 23mm.Weight: 5g.
  • Specifications: 
    Operating Temperature Range: -10 ~ + 70
    GPIO: S; signal output, +; power supply (VCC), -; ground (GND). 
    Input: Positive electrode of the piezoelectric ceramic. 
    Gnd: Negative electrode of the piezoelectric ceramic. 
    S-port is connected with the controller's analog input pin. 
    5V and GND are respectively connected the power supply of + 5V and GND. 
    Input and Gnd are already connected with the piezoelectric ceramics' positive and negative


Product Details

Est. Packaging Size Specifications

N/A

BUY

Ceramic Piezo Vibration/Strain Module (3V3/5V)

Regular price: R49.60
Qty To Purchase:
In Stock: 10



GET NOTIFIED!

Get notified when new stock arrives! Simply provide your email address:


Email Address:



Categories