BAROMETRIC PRESSURE SENSOR MODULE (BMP180)
  • BAROMETRIC PRESSURE SENSOR MODULE (BMP180)

#4994: BAROMETRIC PRESSURE SENSOR MODULE (BMP180)

R38.95


This barometric pressure sensor is easy to use with an Arduino.


The BMP180 is the next-generation of sensors from Bosch, and replaces the BMP085. The good news is that it is completely identical to the BMP085 in terms of firmware/software - you can use our BMP085 tutorial and any example code/libraries as a drop-in replacement. The XCLR pin is not physically present on the BMP180 so if you need to know that data is ready you will need to query the I2C bus.

Product Details

  • Vin: 3 to 5VDC
  • Logic: 3 to 5V compliant
  • Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
  • Up to 0.03hPa / 0.25m resolution
  • -40 to +85°C operational range, +-2°C temperature accuracy
  • This board/chip uses I2C 7-bit address 0x77.

Other Products in the same category

BUY

BAROMETRIC PRESSURE SENSOR MODULE (BMP180)

Regular price: R38.95
Qty To Purchase:
In Stock: 3



Categories