Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Waverley, Pretoria, South Africa.
Leobot Electronics Online Shop
R3.89
This is a 'latching switch', which is a switch that maintains its state after being activated. A push-to-make, push-to-break switch would therefore be a latching switch - each time you actuate it, whichever state the switch is left in will persist until the switch is actuated again.
Temperature :- 40~70°CRated Load :0.3A 60V AC /1.5A 25V ACContact Resistance :<=0.02ΩWithstand Voltage :AC250V(50Hz)/minActuation Force : 100-350gInsulation Resistance :>=100MΩLife : 100000 times
Length: 15.00mmWidth: 6.00mm
Tactile Push Button Switch 6X6X7
R4.15
YELLOW 12mm/3A Waterproof Momentary Push Button Switch
R15.90
Tactile Push Button Switch 6X6X6
RED 12mm/3A Waterproof Momentary Push Button Switch
R15.99
BLUE 12mm/3A Waterproof Momentary Push Button Switch
Tactile Push Button Switch 6X6X11
Tactile Push Button Switch 6X6X8
Tactile Push N/O Switch - Latching
Tactile Push Button Switch 6X6X4.3
BLACK 12mm/3A Waterproof Momentary Push Button Switch
WHITE Big Button Tactile Switch (12X12MM)
R5.95
Tactile Push Button Switch 6X6X13
WHITE 12mm/3A Waterproof Momentary Push Button Switch
Tactile Push Button Switch 6X6X5
Tactile Push Button Switch 6X6X10
Get notified when new stock arrives! Simply provide your email address: