Leobot Electronics South Africa

Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Port Elizabeth, South Africa.

    • Leobot Electronics Online Shop

3S 20A 18650 Li-ion Lithium Battery BMS (12.6V)
  • 3S 20A 18650 Li-ion Lithium Battery BMS (12.6V)

#5168: 3S 20A 18650 Li-ion Lithium Battery BMS (12.6V)

R88.95


Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)
Product Size: 64mmx20mmx3.4mm
Material: Metal
Charging voltage: 12.6V
Maximum output current: 20A
Maximum output power / charging power: 252W

Product Details

Item Minimum Typical Maximum Unit
Consumable Current 12 18 24 uA
Over charge protection voltage  4.2 4.25 4.3 V
Over charge recovery voltage 4.1 4.16 4.2 V
Over charge delay time 500 1000 1500 ms
Over discharge protection voltage 2.35 2.5 2.7 V
Over discharge recovery  voltage 2.9 3.2 3.3 V
Over discharge delay time 50 100 150 ms
Conduction resistance 10 12 14 mΩ
Overcurrent protection current 37 40 43 A
Over current delay time 5 10 15 ms
Normal operating current 0 20 20 A
Transient current (<10ms) 18 20 22 A
Ambient temperature -40 25 85 °C


Note:
1. Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip.
2. After connection, it need to first charge activation, then will have the output.
3. Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the
    professional knowledge of this module before buying

Other Products in the same category

BUY

3S 20A 18650 Li-ion Lithium Battery BMS (12.6V)

Regular price: R88.95
Qty To Purchase:
In Stock: 15



Categories
 
  • South Africa Arduino, Robotics & Electronics Supplier

Shipping & Coverage

For South Africa, PostNet is used for shipping at R99 per order if delivered to your local PostNet or R180 if the parcel needs to be delivered to your doorstep! Postage is FREE for orders over R1000!


We supply Arduino, Robotics and all of our other DIY Electronics throughout South Africa including Durban, Johannesburg, Pretoria, Cape Town, Bloemfontein and rural areas.


3D Printing Service available at Leobot3d.com for all your custom printing needs.


Import low-cost high-quality 3D filament and 3D printers as part of through 3dImportClub.co.za.


Information


Contact us

Admin Office:
15 Gerdine Street,

Summerstrand,

Port Elizabeth,

Eastern Cape,

South Africa,

Phone: 082 776 7668

Fax: 0865188874


© 2021 Design by Leobot Electronics and w3layouts