Dot Matrix Display Module (MAX7219)
  • Dot Matrix Display Module (MAX7219)

#565: Dot Matrix Display Module (MAX7219)

R67.30


The MAX7219 is an integrated serial input / output common-cathode display driver, it is connected to a microprocessor with 8-digit 7-segment digital LED display can also be connected to the bar graph display or 64 separate LED. On B BCD encoder including an on-chip, multi-channel scanning loop word drive, but also an 8 x 8 static RAM is used to store each data. Only one external register is used to set the current of each LED segment.

A convenient four-wire serial interface can connect all general-purpose microprocessor. Each data can be addressed in the update does not need to rewrite all the display. MAX7219 also allows the user to select on each data coding or non-coding.
The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display the 1-8 bits of data, as well as a let all LED light detection mode.

Only need three IO ports can drive a dot-matrix! Dot-matrix display, flicker-free! Supports cascading!

 

The MAX7219 is an integrated serial input / output common-cathode display driver, it is connected to a microprocessor with 8-digit 7-segment digital LED display can also be connected to the bar graph display or 64 separate LED. On B BCD encoder including an on-chip, multi-channel scanning loop word drive, but also an 8 x 8 static RAM is used to store each data. Only one external register is used to set the current of each LED segment.

A convenient four-wire serial interface can connect all general-purpose microprocessor. Each data can be addressed in the update does not need to rewrite all the display. MAX7219 also allows the user to select on each data coding or non-coding.
The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display the 1-8 bits of data, as well as a let all LED light detection mode.

Only need three IO ports to drive a dot-matrix! Dot-matrix display, flicker-free! Supports cascading!

 

Wiring instructions:

Module on the left as an input port, output port on the right.

Control of a single module, simply input port to the CPU

3 more modules cascade input termination module of a CPU, 2 output termination module input and output of the two modules is terminated with the input end of the first three modules, and so on. ..

51 MCU, for example:

VCC → 5V

GND → GND

DIN → P22

CS → P21

CLK → P20

Product Details

A single module can drive an 8 * 8 common cathode lattice

Module operating voltage: 5V

Module size: 5 cm in length X width 3.2 cm x 1.5 cm

4 with four screws hole, aperture 3mm, 

Modules with input and output interface, thus supports multiple cascaded modules

Wiring instructions:

Module on the left as an input port, output port on the right.

 

VCC → 5V

GND → GND

DIN → P22

CS → P21

CLK → P20

Tutorials

Arduino Introduction
Introducing you to the awesome Arduino!

BUY

Dot Matrix Display Module (MAX7219)

Regular price: R67.30
Qty To Purchase:
In Stock: 5



Categories