Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Port Elizabeth, South Africa.
Leobot Electronics Online Shop
R157.95
Use this stepper motor driver to control stepper motors at 3A! This driver is perfect for DIY CNC machines, requiring high power & performance.
- Using the TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.- For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.- Automatic half current function.- 6N137 high-speed optical coupling, guarantee high speed without losing step.
Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)Rated maximum output: ± 3A, peak 3.5AWorking voltage: DC 10V-35VRecommended to use a switching power supply: DC24V power supplySubdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.
L9110S H-bridge Stepper Motor Dual DC Motor Driver (2.5-12V)
R55.45
CNC Controller Stepper Motor Driver (TB6560 Mach3, 3.0A, 1-Axis)
Dual DC Motor Driver Module (1.5A, 2-Way, MX1508 ,PWM Speed Control; Dual H-Bridge)
R31.51
High-Power Motor H-Bridge Driver (43A, BTS7960B)
R234.35
Flexinol Actuator Nitinol Wire - (0.3mm Diameter, 0.5M Length, Memory Wire)
R162.00