ESP32-CAM WiFi + bluetooth Camera Module Development
  • ESP32-CAM WiFi + bluetooth Camera Module Development

#5163: ESP32-CAM WiFi + bluetooth Camera Module Development

R179.93


1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications. 

Features:
 
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
-Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
- Support secondary development

Product Details

 

  • Operating Voltage

– 5V DC

  • Power Consumption (Typical)

– 180mA without Flash / 310mA with Max Flash               

  • WiFi

– 802.11 b/g/n/e/i

  • Bluetooth

– 4.2 BR / EDR / BLE Standards

  • Antenna

– Onboard PCB Antenna : 2dBi Gain

  • CPU

– 32bit Low-Power Dual-Core

  • RAM

– Onboard 520Kb SRAM with External 4M PSRAM

  • SPI Flash

– Default 32Mbit

  • I/O Ports

– 9

  • Serial Port Rate

– Default 115200 bps

  • Functions Per Second (Benchmark) 

– Up to 600 DMIPS

  • Operating Frequency

– 80 to 240MHz

  • Spectrum Range

– 2412 to 2484MHz

  • Interface Support

– UART / SPI / I2C / PWM / ADC / DAC

  • Camera Support

– OV2640 and OV7670

  • Image Output Format

– JPEG (Only OV2640) / BMP / Grayscale

  • TF Card Support

– Up to 4GB

  • Receiving Sensitivity

– CCK, 1Mbps : -90dBm

– CCK, 11Mbps : -85dBm

– 6Mbps (1/2 BPSK) : -88dBm

– 54Mbps (3/4 64-QAM) : -70dBm

– MCS7 (64Mbps, 72.2Mbps) : -67dBm

  • Transmission Power

– 802.11b: 17±2 dBm (@11Mbps)

– 802.11g: 14±2 dBm (@54Mbps)

– 802.11n: 13±2 dBm (@MCS7)

  • Working Mode Support

– STA / AP / STA+AP

  • Sleep Mode Support

– Modem Sleep : 20mA @ 5V DC

– Light Sleep : 6.7mA @ 5V DC

– Deep Sleep : 6mA @ 5V DC

  • Distribution Network Support

– Smart Config / AirKiss One-Click

  • Security Protocols

– WPA / WPA2 / WPA2-Enterprise / WPS

Other Products in the same category

BUY

ESP32-CAM WiFi + bluetooth Camera Module Development

Regular price: R179.93
Qty To Purchase:
In Stock: 2



Categories