Leobot Electronics South Africa - Low Cost Arduino & Electronic Component Supplier based in Waverley, Pretoria, South Africa.
Leobot Electronics Online Shop
R84.32
A 1-channel high power relay module is an electronic device that is used to control high-power electrical devices, such as motors, lights, or appliances. It consists of a relay, a control circuit, and a user interface, and is typically used to switch electrical devices on or off remotely, or to switch between multiple devices. The module is typically triggered by a low-power control signal, such as a voltage from a microcontroller or a switch. The 5V, 30A version of this module is designed to handle a load of up to 30 amperes at a voltage of 5 volts, making it suitable for use with high-power devices. The H/L-trigger version of the module can be triggered by either a high or low level control signal.
Use this high power relay to control devices drawing up to 30A with a 5V controller such as an Arduino.
30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
Module can be set high level or low level trigger by the jumper
Power indicator light (green), relay status indicator light (red)
Module Size:50mm*33mm*24mm
Technical parameters:
Voltage version:5V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
Module interface specifications:
DC+ : DC power supply positive pole
DC- :DC power supply negative pole
IN : signal triggering pin
JD+ : relay control voltage positive
JD- : relay control voltage negative
DC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
Normally closed pin (NC) : relay normally closed pin
Common pin (COM) : relay common pin
Normally opened pin (NO) : relay normally opened pin
Rated current of the interface is 16A
N/A
Arduino Automated Plant Water ProjectA simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.
Arduino IntroductionIntroducing you to the awesome Arduino!
Simple Arduino RC Car/Robot A guide to construct your own Arduino-based 2 Wheel-Drive Robot
Arduino F.A.Q Arduino Frequently Asked Questions & Answers
4-Channel Solid State Relay (SSR) High Level
R176.80
1-Channel H&L Level Trigger Optocoupler 5V Relay Module
R32.95
4-Channel 12V Optocoupler Relay Module (10A/250V AC; 10A/30V DC; Negative Trigger)
R74.95
1-Channel Solid State Relay (SSR) High Level Trigger
R62.40
2-CHANNEL SOLID STATE RELAY (SSR)
R104.00
5V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger
R97.85
1-Channel Relay Module (5V Low-Level-Trigger )
R34.95
2-Channel Relay Module (5V Low-Level-Trigger )
R41.60
2-Channel Optocoupler 12V Relay Module (10A/250V AC; 10A/30V DC)
R49.55
1-CHANNEL HIGH POWER RELAY MODULE (5V, 30A H/L-TRIGGER )
24V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger
R82.30
12V Relay (10A 250VAC, SRD-12VDC-SL-C)
R55.12
8-Channel Relay Module (5V Low-Level-Trigger )
R189.95
24V Relay (16A 250VAC, SMIH-24VDC-SL-C)
R71.50
24V Relay FTR-F4AK024T
R29.00
Get notified when new stock arrives! Simply provide your email address: